采场动压分布特征及高效瓦斯抽放技术研究

河南地区大部分煤矿所采煤层均属于三软煤层，煤层透气性差，瓦斯治理困难。现阶段河南区域煤与瓦斯突出矿井主要采用穿层钻孔及开采保护层作为区域防突措施，而低瓦斯矿井或临突矿井（低瓦斯矿井与煤与瓦斯突出矿井相邻）存在高瓦斯区时，仅仅用风排瓦斯很难达到治理效果，近些年煤矿发生瓦斯事故多数为低瓦斯矿井，所以低瓦斯矿井和临突矿井存在高瓦斯区域的工作面回采期间瓦斯治理尤为重要。根据采场“竖三带”和“横三区”理论，利用钻孔抽放效果考察法和工作突出预测指标法研究了采场围岩动压分布特征。在此基础上，通过优化动压区抽放钻孔设计，提高了瓦斯抽放效果。瓦斯抽放量提高了1.8倍，有效降低了工作面生产期间的风排瓦斯量，提高了生产效率，保证了矿井安全生产。     

Physicochemical Properties of Zwitterionic Drugs in Therapy

In solution, amphoteric compounds exist in anionic, uncharged, zwitterionic and cationic forms. The importance of zwitterionic drugs is currently under-represented in the literature. Herein, the acid-base parameters, lipophilicity and solubility of such compounds are discussed to deepen the molecular-level understanding of their pharmacokinetic and pharmacodynamic behaviour. Our recent studies show there are many drug molecules, including thyroid hormones and 5-hydroxytryptophan, the precursor of the neurotransmitter serotonin, for which the contribution of the zwitterionic microspecies to the overall lipophilicity exceeds that of the uncharged one, which is of higher individual lipophilicity, but occurs in much lower concentration. The second part of the minireview highlights the most important zwitterionic compounds in therapy, grouped into therapeutic classes. The importance of the charge of the molecules is emphasized in their binding to the target molecules.     

公路治超必须从动态称重抓起

公路治超事业与动态称重事业是一对相互依存的共同体,治超离不开动态称重,动态称重也离不开治超事业。在"四个一流"公路治超体系建设的同时,与公路治超同呼吸共命运的动态称重技术也取得了很大发展,已经完成了由轴载荷计重模式向整车称重模式的转化,新技术已经具备高准确度、高稳定性、高通行率等特征,能够适应公路现场应用,计量结果完全不受车辆不规则驾驶的影响,精准可靠。公路治超事业需要准确的称重技术,动态称重技术需要公路治超的舞台,"四个一流"的公路治超信息化体系建设更离不开一流的动态称重技术。     

桁架式火星探测器的着陆缓冲特性分析

着陆缓冲机构是着陆器实现行星探测软着陆的关键部位之一,它的缓冲性能直接关系到着陆器是否能安全地在行星表面实现软着陆。根据某院提供的火星着陆器模型,在三维建模软件中建立着陆器的合理简化模型,为了提高分析着陆器软着陆过程冲击响应的准确性,采用MSC公司的Patran/Dytran有限元软件,用瞬态动力学的方法对着陆器的缓冲性能进行分析。仿真结果与试验数据十分吻合,着陆器的缓冲和传力性能良好。因此,采用拉杆缓冲的桁架式火星着陆器是可行的,仿真结果与试验数据也为今后的火星探测提供了参考。     

Probabilistic seismic damage assessment of reinforced concrete buildings considering directionality effects

Most of buildings and structures are usually projected according to two main axes. However, the geographical position of these buildings varies randomly. Such random distributions of the azimuthal positions of structures, in most of the cities, generally, are not accounted for when assessing their seismic risk; certainly, the direction of the seismic loads is another highly random variable. Moreover, an additional important source of uncertainty is related to the structural response, mainly due to the random character of the mechanical properties. There is a consensus that uncertainties must be considered for adequately assessing the seismic risk of structures, but these directionality effects have not been deeply explored so far. In this article, the influence of the high uncertainty involved in these input variables on the expected seismic damage is analysed. Thus, an actual earthquake, which affected the southern part of Spain, is studied. Notably, damages on a group of affected buildings, located close to the epicentre, are analysed and discussed in detail. The results show that the influence of the random azimuthal position of structures is an important source of uncertainty and that it should be taken into account when estimating the expected seismic risk in urban areas.     

高温气冷堆舱室抗商用飞机撞击的耦合数值分析

本文建立了大型商用飞机撞击典型高温气冷堆核电站反应堆舱室的非线性有限元模型，计算中混凝土舱室直接采用工程用钢筋混凝土的损伤塑性本构模型，飞机结构采用Johnson-Cook本构模型。对飞机高速撞击高温气冷堆核电站反应堆舱室非线性撞击过程进行模拟计算，得出正面和侧面撞击条件下的撞击载荷曲线、撞击位移云图、反应堆舱室混凝土破坏情况等结果。评估表明，反应堆舱室结构在撞击条件下的整体损伤微小，可为保护内部关键设备提供重要的屏障功能。     

袋装水泥装车机及拨板机构的设计与研究

针对袋装水泥装车半自动化问题，设计一款全自动装车机。首先，根据袋装水泥车间生产状况，确定水泥装车方案，即采用抽屉式逐层装车原理，利用ＳｏｌｉｄＷｏｒｋｓ创建装车机三维模型；其次，为使水泥包快速准确地到达指定位置，针对拨板机构中的分拨板及导柱进行受力分析，建立其力学模型，推导出应力公式；最后，通过 ＡＮＳＹＳ有限元软件进行分拨板的力学仿真，为后续的优化设计提供依据。     

Single nanowire assembled by liquid dielectrophoresis for on-chip technologies

ABSTRACT

Study on dynamic tensile properties and atomic chain fabrication of single nanowire, for understanding its dynamic tensile properties and unique physical properties of atomic chain to fabricate atom scale devices, is one of frontier research issues in nano-scale science. However, how to assemble single nanowire on a tensible micro-structure becomes one of the most difficult problems, which severely restricts the development of this research field. In this paper, after the ultrahigh tensible microelectrode chip is fabricated by micro-electromechanical systems technology, hexamethyldisilazane is utilized to improve hydrophobicity of the chip, and then a micro-droplet dielectrophoresis experimental platform and technology is developed to assemble single nanowire on the sensible microelectrode. Experimental results show that accurate and efficient assembly of single Cu nanowire is realized, which contributes greatly to the further research of dynamic tensile properties and atomic chain fabrication. And for guiding the assembly experiments, finite element technology is also utilized to analyze the local micro electro-field around the microelctrodes during dieletrophoresis experiments.     

广州市传统滨水动态人文景观的类型及空间格局

文章从风景园林学科的角度出发，对传统老广州曾经存在的地域人文景观里的典型——滨水动态人文景观进行了初步的全面整理，以日常型滨水动态人文景观和节庆型滨水动态人文景观为两种基本类型，总结梳理出超过25种滨水动态人文景观的主要类型，充分说明了广州市传统滨水动态人文景观的多样性和独特性。并以景观格局的理论视角分析了传统滨水动态人文景观在广州旧城的空间格局，分析得出其两个核心聚集区：以祭祀水神的仁威神庙为精神核心节点的呈圆形扩散的西关功能核心区和以长堤滨江段为中线的呈椭圆形扩散的珠江两岸功能核心区，并总结了促使这种人文景观发展与繁盛的历史经验，为广州地域文化景观的发扬及旧城更新工作提供借鉴。